Buffalo DORUS KS 3900 can be widely used in laminating MDF, particleboard and other sheet metal and PVC, ABS, melamine, veneer and veneer edge and so thin sapwood. All raw materials are in line with the FDA (US Food and Drug Association) regulations 21CFR175.105 "binder." Recommended Operating Conditions roller temperature: 180-200 oC concentrate speed: ≥10m / min plastic tank temperature: 180-210oC substrate moisture content: 8--10% Pressure: 1 - 4 Kg / cm2 substrate temperature: ≥15oC operation · The actual temperature measurements should always be on the rollers with a hot melt adhesive thermometer. · In order to avoid thermal degradation, the working gap bath temperature should be appropriately reduced. · Roller temperature is too low will result in low adhesion. Storage should be stored at 40o C or less, dry, cool place, storage period of two years. Notes · Do not mix with other adhesives. · Hot Melt tank should be covered tightly to prevent debris falling into affect adhesive performance. · Due to the use of hot melt adhesive to be heated, the need to wear personal protective equipment · Proposal "advanced - by using" recycled. Physical Characteristics Appearance: Amber particulate solid content: 100% Viscosity: @ 200oC: about 76,000cps @ 180oC: About 141,000cps softening point: about 101 oC, global law standard packaging: Before 25Kg / bag using this product, please Read "Precautions" and product safety data sheet