Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13671637

- Product Categories
- Puzzle glue
- Puzzle glue
- Vacuum plastic
- Hot Melt Adhesive
- Wood powder
- Water-based glue
- Yellow plastic
- PVC plastic
- Friendly Links
Information Name: | Henkel jigsaw puzzle glue waterproof glue |
Published: | 2015-04-04 |
Validity: | 30000 |
Specifications: | 20KG / barrel |
Quantity: | 1000.00 |
Price Description: | |
Detailed Product Description: | Note 1, moisture content should be between 8-12%, too high or too low will affect the glue quality. 2, wood glued surface should be smooth and flat ﹑ ﹑ not warp. 3, before the puzzle, turn the other preparation work, then configure the glue. 4. When configuring glue ﹑ ratio must be correct, you should use metered container, such as a graduated cylinder or measuring cup ﹑ prior good amount proportional to a container. 5, the glue is mixed with a curing agent, should stir. 6, glue with a good, please run out of plastic during the activity. The activity of glue (glue and hardener are mixed in saved time can continue to use the known active period) is about 2 hours / 25 ℃, higher temperatures in summer, slightly shorter than the active period, whereas the activity of the longer, so please Note that the temperature changes. Therefore, the operation should be based on the amount of allocation, and within two hours spent in order to avoid waste. 7. After the glue is mixed or slightly fizzy may swell, are normal, you can continue to use. 8, glue can be preheated to 50-60 ℃ ﹑ reduce the viscosity of gum. Fully penetrate into the pores of the wood, the adhesive glue effect better. 9, coating should be uniform amount, require double-sided adhesive. 10, gumming time should be, too long, the bonding strength will decline. 11. After the glue can not let go of long exposure, otherwise bonding strength will decline. 12, when the pressure, the pressure should be enough, but not too large, should be moderate, the pressure should be uniform. Cork is 6KG / c m, hardwood for 10-15KG / c㎡. Crimp: 5 ℃ -15 ℃ at least 40 minutes; 15 ℃ -30 ℃ at least 30 minutes; 30 ℃ above at least 15 minutes. 13, the above parameters are from the company laboratory. Because manufacturers are more variation factors during the operation, it is recommended to try your company or technical department after detection, to determine whether this product is suitable for the proposed process and use your order quantities apply, otherwise I am afraid this end the company does not assume the resulting liability arising. Health and Safety This product is alkaline, should avoid prolonged contact with the skin, it gets, please rinse immediately with plenty of water, seek immediate medical attention if they feel unwell. Packaging and storage of this product 20KG / barrel (NW), 50KG / barrel (net weight) should be stored in a dry place, avoid moisture unopened product, the shelf life of six months |
Admin>>>
You are the 25882 visitor
Copyright © GuangDong ICP No. 10089450, Suzhou, China Ming Ding pink plastic Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 25882 visitor
Copyright © GuangDong ICP No. 10089450, Suzhou, China Ming Ding pink plastic Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility